Tote Bag Designs Explaining Nine Design Sizes of Tote Bags

The design size of the tote bag is determined by the size of the inner packaging, but there are also commonly used standard sizes. The design sizes of handbags commonly used in the market are generally divided into three types: 3 openings, 4 openings, and folios. The unit of size is composed of length × width × height. The following is a comprehensive list of the design dimensions of the handbag, including general and special sizes.

Reference size of positive folio paper bag: 771mm×529mm

Positive folio tote bags do not have high requirements on the capacity of the tote bag, and it saves 10%-15% in paper cost compared to large tote bags. If the number of prints is small and both sides of the handbag are exactly the same, you can consider using 2 pieces of 4-fold printing, and paste the 2 pieces into a complete handbag during subsequent processing, which can save some costs relatively. In practice, this scheme can be adopted in consultation with the printing factory. In addition, the bleeding at the upper and lower discounts of the screen can be appropriately enlarged, preferably larger than 5 mm.

folio paper bag reference size: 884mm×584mm

Handbags with generous folio size are one of the most common types of handbags, which can comfortably hold 8 and 12 hardcover albums. Such a large tote bag requires special attention to its load-bearing capacity, and the knot in the buttonhole of the handle should be strong and thick to ensure that it will not fall out of the buttonhole. In addition, the inner bottom should be lined with a cardboard of more than 250g, so that the force on the bottom of the bag can be uniform, and the load-bearing capacity of the bag can be greatly improved 883 Police Discount Code NHS.

3-open handbag reference format size: 874mm×394mm

The generous 3-open handbag is horizontal, with a wide mouth and a shallow bottom. It is more convenient to pick and place items, and at the same time, the cost of paper is 33% less than that of the folio bag, which can meet the loading and carrying of A4 size material books, and this horizontal structure is more conducive to displaying the visual effect of the picture. It should be noted that the distance between the lifting rope and the buttonhole should not be too small, it should be about 14cm, so as to ensure the balance of the center of gravity when lifting.

Ding 3-open handbag reference format size: 874mm×394mm

A 3-moto bag is a relatively rare size type. It is slightly square when viewed from the front. It is a seldom-used type of tote bag. It is suitable for carrying some special items, such as 12-moto albums. For design and printing precautions, refer to the 3-open handbag.

Reference layout size of positive 4-open handbag: 544mm×389mm

The 4K handbag is not commonly used, except that it saves a little paper cost compared with the 4K Dadu, but it can be loaded into a 16K book, and the usability is greatly reduced. The 4-open tote bag usually uses 157-250g coated paper, and it is not suitable to use high-weight cardboard.

6-open handbag reference format size: 441mm×396mm

The Dadu 6K handbag is just suitable for loading 32K size books and some other specific items. It looks slender, light and elegant. When fully considering that the tote bag only needs to hold some small items, it may be considered to be designed in this size.

Bunny Tote Bag

Simple Bunny Origami Tote Bag

Tools/Materials

Square colored paper, rectangular colored paper.

Method/Step

Prepare a square colored paper and fold it corner to corner, as shown in the picture.
Fold the bottom corner in half toward the centerline, the top corner is also folded in half toward the centerline, and the bottom corner is folded in half toward the top corner.
After turning the paper over, the steps are the same as above. as the picture shows.
Next, fold up a line next to the centerline of the corner on the left and right.
Open the paper and fold it according to the crease. This is the folded handbag. Now let’s decorate.
Paste on the bunny’s face. as the picture shows.
Then glue the bag of the tote bag design, as shown in the picture.
The bunny tote bag is ready, isn’t it cute

Precautions

It must be firmly pressed when folded.

Related Experience

Let’s make handmade series
How to fold a little rabbit by hand
How to make a cardboard bunny
How to Fold a Rabbit Handbag
Super Easy Rabbit Origami

One Piece set sail Hawkins how to get

One Piece Set Sail Hawkins is a new partner in the game, so how to get Hawkins? The editor below summarizes the ways to obtain Hawkins. Players who want to get it should not miss it.

Detail

During the event
Adventure, Secret Treasure: New Leap Moon Lucky Bag for a limited time
Telephone Bug Shop: Leap Moon Lucky Bags are sold for a limited time (limited to 200 per day) 24S Discount Code NHS.
Leap Moon Blessing Bag: Open it to obtain randomly: Book of Trial Point (Small)*1, Level 1 Crystal Pack*1, Level 6 Crystal Pack*1, Partner Bond (S Level)*1, Diamond*2016, Leap Moon Any one of the lucky bags*2.
6 yuan per day, and you can get extra Hawkins character fragments*2, diamonds*60
Accumulate 30 yuan per day, and get additional Hawkins character fragments*3, book of trial points (small)*1
Accumulate 98 yuan per day, and get additional Hawkins character fragments*5, book of trial points (middle)*1
Accumulate 198 yuan per day, and get additional Hawkins exclusive fragments*10, book of trial points (large)
Accumulate 328 yuan per day, and get additional Hawkins character fragments*20, book of trial points (large)
648 yuan per day, and get additional Hawkins exclusive fragments*20, book of trial points
Rewards can be obtained cumulatively, and can only be obtained once per level per day.
After completion, please claim it in the “Event” in the game in time, and the reward will be reset at 0 points every day